Last updated: November 21, 2026
The best electricians in Salem, Oregon for 2027 are Northside Electric, Connections Electric, Cherry City Electric, Santiam Electric and Northwinds Electric Company, followed by Mr. Electric of Salem, Safety Electric, Safety Home Services, Distinct Electric and Judson’s. The list covers residential service, panel and EV charger upgrades, remodel wiring and commercial and industrial contracting.
Demand for electrical work in Salem has shifted in the last few years. Heat pumps, induction ranges, EV chargers and home batteries all add load, and many houses built before the 1980s still run on 100 amp or smaller panels. Winter windstorms and ice also cause outages, which has pushed more households to add generator inlets or standby generators. The right electrician depends on whether you need a quick repair, a service upgrade or a full commercial build.
We compared ten companies on history, the type of work they focus on, emergency service and the licenses to check.
| Company | Based In | Founded | Best For |
|---|---|---|---|
| Northside Electric | Salem | Not published | Broad scope and emergencies |
| Connections Electric | Salem | 1990 | Homes and small commercial |
| Cherry City Electric | Salem | Over 30 years | Commercial and industrial projects |
| Santiam Electric | Salem | 1998 | Mixed residential, commercial and industrial |
| Northwinds Electric Company | Salem | Over 30 years | Residential service and repairs |
| Mr. Electric of Salem | Salem | Not published | Residential upgrades and EV chargers |
| Safety Electric | Salem | Not published | Industrial facilities |
| Safety Home Services | Salem | Not published | Home electrical upgrades |
| Distinct Electric | Salem | Not published | Small residential jobs |
| Judson’s | Salem | 1935 | Jobs that cross trades |
Northside Electric is a Salem electrical contractor offering residential, commercial, industrial, low voltage and renewable energy services, and it takes service calls around the clock.
That breadth makes Northside a strong default. The same company that answers a 2 a.m. outage call can quote a solar tie-in, data cabling for an office or a panel replacement. Ask whether the electrician who diagnoses your problem will also do the repair, and get the price before work starts.
Connections Electric has served Salem since 1990 with residential and commercial electrical work throughout the Willamette Valley, including Keizer and Woodburn.
Three decades in one market gives Connections a deep familiarity with Salem’s housing stock, from older homes with ungrounded wiring to newer subdivisions. It is a good call for remodel wiring, lighting upgrades and service panel replacements where permits and inspections are part of the job.
Cherry City Electric is a Salem contractor on 22nd Street SE with more than 30 years of experience and a large portfolio of completed commercial work. It is now part of the Morrow Meadows family of electrical companies.
Cherry City is the pick for business owners, developers and institutions with significant projects: tenant improvements, new commercial buildings, industrial controls and service upgrades. The backing of a large national contractor adds capacity and bonding for bigger jobs.
Santiam Electric has been part of the Willamette Valley community since 1998 as a family-owned and operated electrical contractor. It installs, maintains and repairs electrical systems for commercial, industrial and residential properties.
A family firm that works across all three sectors is useful for small business owners who need both a shop upgrade and help at home. Ask Santiam about maintenance contracts if you run equipment that cannot afford downtime.
Northwinds Electric Company has served Salem and the Willamette Valley for more than three decades, providing journeyman electrician services to homes and businesses.
Northwinds suits homeowners who value an experienced electrician for troubleshooting: flickering lights, tripping breakers, dead outlets and older wiring that needs assessment. Ask for a written summary of anything unsafe the electrician finds.
Mr. Electric of Salem is the local franchise of the Neighborly-owned Mr. Electric brand. Its licensed electricians handle residential services from lighting upgrades and panel repairs to EV charging station installation.
The franchise model brings upfront pricing and a brand guarantee. If you are buying an EV, ask for a load calculation to see whether your existing panel can carry a Level 2 charger or whether you need a service upgrade or a load management device.
Safety Electric works from 25th Street SE in Salem and provides electrical services for industrial properties in Salem, Keizer and nearby areas.
Industrial electrical work, including motor controls, plant power distribution and equipment hookups, needs crews that understand production schedules and safety programs. Manufacturers and food processors in the mid-valley should include Safety Electric when bidding plant work.
Safety Home Services focuses on residential electrical work, including panel upgrades, EV charger installation and lighting.
Homeowners electrifying a house in stages, adding a heat pump this year and an EV charger next, benefit from an electrician who plans the panel capacity for both. Ask for options that include a panel upgrade and a load management alternative.
Distinct Electric is based on Liberty Road South in Salem and provides electrical services for customers throughout the Willamette Valley, with free estimates.
Smaller shops like Distinct are often the easiest to book for modest jobs such as adding outlets, replacing fixtures or installing ceiling fans. Confirm the CCB license and that a licensed electrician will do the work.
Judson’s is a family-owned Salem company dating to 1935 that provides electrical, plumbing, heating and air conditioning services across the valley.
Judson’s is useful when electrical work is tied to another trade, such as wiring for a new heat pump or a water heater. One company coordinating both avoids scheduling gaps between contractors.
In Oregon, an electrical contractor needs a CCB license and an electrical contractor license from the Building Codes Division, and the person doing the work needs a journeyman or limited electrical license. Check both.
Panel upgrades, new circuits, EV chargers and generator installs need permits in Salem. The electrician should pull them and arrange the inspection.
Before adding big loads like EV chargers or heat pumps, a load calculation shows whether your panel can handle them. It can save thousands if a load management device avoids a full service upgrade.
Commercial and industrial contractors are set up for bigger projects but may not prioritize small home jobs, and vice versa. Match the company to the work.
Ask for a fixed price for defined jobs and a clear hourly rate plus trip charge for troubleshooting.
Some heat pump, battery and EV charger programs offered through utilities or Energy Trust of Oregon require specific equipment or documentation. An electrician who has done these projects before can tell you what is needed and keep the paperwork straight, which protects your rebate.
Many Salem households are moving from gas to electric for heating, water heating and cooking, and adding an EV. Each step adds demand on the electrical service. A 100 amp panel may handle one or two additions with careful planning, while a full conversion often calls for 200 amps. Smart panels and load management devices can delay or avoid a costly upgrade by managing when big loads run.
Storms are the other consideration. If outages are a concern, a manual transfer switch or interlock with a portable generator inlet is an affordable middle ground, while a standby generator or battery system costs more but switches over automatically. Ask your electrician to explain the safety requirements; back-feeding a house without proper equipment is dangerous for you and for utility crews.
Salem Electric, the member-owned utility serving parts of Salem, and Portland General Electric, which serves much of the rest of the city, have different programs and interconnection rules for solar and batteries. Your electrician should know which utility serves your address.
Much of Salem’s housing was built between the 1940s and the 1970s. Homes from that era may still have two-prong ungrounded outlets, cloth-insulated wiring or small fuse boxes and panels. Some brands of panels installed in the 1970s and 1980s have a poor safety record, and many insurers ask about them. If you are buying an older home, ask an electrician to inspect the panel and a sample of outlets before closing.
Signs that need attention right away include breakers that trip repeatedly, outlets or switch plates that feel warm, a burning smell, buzzing at the panel and lights that dim when large appliances start. Do not keep resetting a breaker that trips; it is doing its job, and the cause should be found.
Safety upgrades are often inexpensive compared with the risk. Adding GFCI protection in kitchens, bathrooms, garages and outdoors, AFCI protection for bedroom circuits, and hard-wired, interconnected smoke and carbon monoxide alarms are all common jobs that a licensed electrician can quote quickly.
Small service calls often start at one to two hundred dollars. A Level 2 EV charger install on a panel with spare capacity typically costs in the hundreds to low thousands, while a full 200 amp service upgrade can reach several thousand dollars or more depending on the meter base and utility work.
We reviewed each company’s website, years in business, the type of electrical work it focuses on, emergency availability and independent reviews. We did not accept payment for inclusion or ranking. Our method is on our how we research and rank page.
We balanced the list across residential specialists, broad-scope contractors and commercial and industrial firms.
Service calls often start at one to two hundred dollars, with defined jobs priced individually. Panel upgrades and EV chargers vary with your existing service.
Yes. Adding a dedicated circuit for a charger requires an electrical permit and inspection, which your electrician should handle.
It depends on panel size and existing loads. A load calculation will tell you, and load management devices can sometimes avoid an upgrade.
Parts of Salem are served by Salem Electric, a member-owned cooperative, and much of the rest by Portland General Electric. Check your bill or ask your electrician.
It is a good idea for homes built before the 1980s. A licensed electrician can check the panel, grounding and wiring type and flag anything an insurer or lender may ask about.
Many homes manage on 100 amps, but a home with a heat pump, EV charger and electric range often needs 200 amps. A load calculation gives the real answer for your house.
Northside Electric and Connections Electric are strong all-round choices, Cherry City Electric and Safety Electric handle commercial and industrial work, and Mr. Electric and Safety Home Services specialize in home upgrades like EV chargers. Check both licenses, insist on permits and ask for a load calculation before adding big loads.
If you are planning several electrification projects over the next few years, share the full plan with your electrician now. Designing the panel and wiring once is almost always cheaper than upgrading piece by piece.